NTMA Training Centers of Southern California - 2017 Annual Report Summary

1. Report Year: 2017

2. Institution Code: 1915141

3. Institution Name: NTMA Training Centers of Southern California

4. Street Address (Physical Location): 12131 Telegraph Road

5. City: SANTA FE SPRINGS

6. State: CA

7. Zip Code: 90670

8. Check all that apply to this institution: Non-profit institution, Corporation

9. Number of Branch Locations: 1

10. Number of Satellite Locations: 0

11a. Is this institution current with all assessments to the Student Tuition Recovery Fund? Yes

11b. Is this institution current on Annual Fees?: Yes

12. Is your institution accredited by an accrediting agency/agencies recognized by the United States Department of Education? Yes

12a. Accrediting Agency (more than one agency may be selected): Accrediting Commission of Career Schools and Colleges

13. If your institution has specialized accreditation from a recognized United States Department of Education approved specialized/programmatic accreditor, list the accreditation below: US Department of Veterans Affairs

14. Has any accreditation agency taken any final disciplinary action against this institution in the reporting year? No

15. Does your institution participate in federal financial aid programs under Title IV of the Federal Higher Education Act? Yes

15a. What is the total amount of Title IV funds received by your institution in this Reporting Year? $2,687,018.08

16. Does your institution participate in veterans' financial aid education programs? N/A

16a. What is the total amount of veterans' financial aid funds received by your institution in this Reporting Year? $186,086.17

17. Does your institution participate in the Cal Grant program? No

18. Is your institution on California's Eligible Training Provider List (ETPL)? Yes

19. Is your institution receiving funds from the Work Innovation and Opportunity Act (WIOA) Program? Yes

20. Does your Institution participate in, or offer any other government or non-government financial aid programs? (i.e., WIC, vocational rehab, private grants/loans, institutional grants/loans) Yes

20a. You indicated "Yes" for #20, please provide the name of the financial aid program below: Vocational Rehab, Institutional Scholarships, Outside Scholarships

21. Provide the percentage of institutional income during this Reporting Year that was derived from public funding: 23

22. Enter the most recent three-year cohort default rate reported by the U.S. Department of Education for this institution, if applicable: 14

23. Provide the percentage of the students who attended this institution during this Reporting Year who received federal student loans to help pay their cost of education at the school: 62

24. Total number of students currently enrolled at this institution: 616

25. Number of Doctorate Degree Programs Offered? 0

26. Number of Students enrolled in Doctorate programs at this institution? 0

27. Number of Master Degree Programs Offered? 0

28. Number of Students enrolled in Master programs at this institution? 0

29. Number of Bachelor Degree Programs Offered? 0

30. Number of Students enrolled in Bachelor programs at this institution? 0

31. Number of Associate Degree Programs Offered? 0

32. Number of Students enrolled in Associate programs at this institution? 0

33. Number of Diploma or Certificate Programs Offered? 41

34. Number of Students enrolled in diploma or certificate programs at this institution? 616

Total Program Count: 41

Institution's Website: www.trainingcenters.org

School Performance Fact Sheet

Catalog

1. Report Year: 2017

2. Institution Code: 1915141

3. Institution Name: NTMA Training Centers of Southern California

4. Name of Program: CNC Machining

5. Degree/Program Level: Diploma/Certificate

6. Degree/Program Title: Diploma/Certificate

7. Number of Degrees, Diplomas or Certificates Awarded: 33

8. Total Charges for this Program: $3,975.00

9. The percentage of enrolled students in 2017 receiving federal student loans to pay for this program: N/A

10. The percentage of graduates in 2017 who took out federal student loans to pay for this program: N/A

11. Number of Students Who Began the Program: 37

12. Number of Students Available for Graduation: 37

13. Number of On-time Graduates: 33

14. Completion Rate: 89.19

15. 150% Completion Rate: 0

16. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

17. Graduates Available for Employment: 33

18. Graduates Employed in the Field: 33

19. Placement Rate: 100

Graduates employed in the field:

20a. 20 to 29 hours per week: 0

20b. at least 30 hours per week: 33

Indicate the number of graduates employed:

21a. In a single position in the field of study: 33

21b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

21c. Freelance/self-employed: 0

21d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

22. Does this educational program lead to an occupation that requires State licensing? No

39. Graduates Available for Employment: 33

40. Graduates Employed in the Field: 33

41. Graduates Employed in the Field Reported receiving the following Salary or Wage: For graduates employed in the field, indicate their salaries/earnings below. If there are none in any specific range, indicate "0." :

1. Report Year: 2017

2. Institution Code: 1915141

3. Institution Name: NTMA Training Centers of Southern California

4. Name of Program: Machinist Training

5. Degree/Program Level: Diploma/Certificate

6. Degree/Program Title: Diploma/Certificate

7. Number of Degrees, Diplomas or Certificates Awarded: 229

8. Total Charges for this Program: $14,500.00

9. The percentage of enrolled students in 2017 receiving federal student loans to pay for this program: N/A

10. The percentage of graduates in 2017 who took out federal student loans to pay for this program: N/A

11. Number of Students Who Began the Program: 258

12. Number of Students Available for Graduation: 257

13. Number of On-time Graduates: 209

14. Completion Rate: 81.32

15. 150% Completion Rate: 89

16. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

17. Graduates Available for Employment: 226

18. Graduates Employed in the Field: 183

19. Placement Rate: 80.97

Graduates employed in the field:

20a. 20 to 29 hours per week: 0

20b. at least 30 hours per week: 183

Indicate the number of graduates employed:

21a. In a single position in the field of study: 183

21b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

21c. Freelance/self-employed: 0

21d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

22. Does this educational program lead to an occupation that requires State licensing? No

39. Graduates Available for Employment: 226

40. Graduates Employed in the Field: 183

41. Graduates Employed in the Field Reported receiving the following Salary or Wage: For graduates employed in the field, indicate their salaries/earnings below. If there are none in any specific range, indicate "0." :

1. Report Year: 2017

2. Institution Code: 1915141

3. Institution Name: NTMA Training Centers of Southern California

4. Name of Program: Inspection Training

5. Degree/Program Level: Diploma/Certificate

6. Degree/Program Title: Diploma/Certificate

7. Number of Degrees, Diplomas or Certificates Awarded: 33

8. Total Charges for this Program: $3,975.00

9. The percentage of enrolled students in 2017 receiving federal student loans to pay for this program: N/A

10. The percentage of graduates in 2017 who took out federal student loans to pay for this program: N/A

11. Number of Students Who Began the Program: 38

12. Number of Students Available for Graduation: 38

13. Number of On-time Graduates: 33

14. Completion Rate: 86.84

15. 150% Completion Rate: N/A

16. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

17. Graduates Available for Employment: 33

18. Graduates Employed in the Field: 33

19. Placement Rate: 100

Graduates employed in the field:

20a. 20 to 29 hours per week: 0

20b. at least 30 hours per week: 33

Indicate the number of graduates employed:

21a. In a single position in the field of study: 33

21b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

21c. Freelance/self-employed: 0

21d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

22. Does this educational program lead to an occupation that requires State licensing? No

39. Graduates Available for Employment: 33

40. Graduates Employed in the Field: 33

41. Graduates Employed in the Field Reported receiving the following Salary or Wage: For graduates employed in the field, indicate their salaries/earnings below. If there are none in any specific range, indicate "0." :

1. Report Year: 2017

2. Institution Code: 1915141

3. Institution Name: NTMA Training Centers of Southern California

4. Name of Program: Conventional & CNC Machining

5. Degree/Program Level: Diploma/Certificate

6. Degree/Program Title: Diploma/Certificate

7. Number of Degrees, Diplomas or Certificates Awarded: 34

8. Total Charges for this Program: $6,475.00

9. The percentage of enrolled students in 2017 receiving federal student loans to pay for this program: N/A

10. The percentage of graduates in 2017 who took out federal student loans to pay for this program: N/A

11. Number of Students Who Began the Program: 44

12. Number of Students Available for Graduation: 44

13. Number of On-time Graduates: 34

14. Completion Rate: 77.27

15. 150% Completion Rate: 77

16. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

17. Graduates Available for Employment: 34

18. Graduates Employed in the Field: 23

19. Placement Rate: 67.65

Graduates employed in the field:

20a. 20 to 29 hours per week: 0

20b. at least 30 hours per week: 23

Indicate the number of graduates employed:

21a. In a single position in the field of study: 23

21b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

21c. Freelance/self-employed: 0

21d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

22. Does this educational program lead to an occupation that requires State licensing? No

39. Graduates Available for Employment: 34

40. Graduates Employed in the Field: 23

41. Graduates Employed in the Field Reported receiving the following Salary or Wage: For graduates employed in the field, indicate their salaries/earnings below. If there are none in any specific range, indicate "0." :

1. Report Year: 2017

2. Institution Code: 1915141

3. Institution Name: NTMA Training Centers of Southern California

4. Name of Program: Mastercam Programming

5. Degree/Program Level: Diploma/Certificate

6. Degree/Program Title: Diploma/Certificate

7. Number of Degrees, Diplomas or Certificates Awarded: 33

8. Total Charges for this Program: $3,975.00

9. The percentage of enrolled students in 2017 receiving federal student loans to pay for this program: N/A

10. The percentage of graduates in 2017 who took out federal student loans to pay for this program: N/A

11. Number of Students Who Began the Program: 38

12. Number of Students Available for Graduation: 38

13. Number of On-time Graduates: 33

14. Completion Rate: 86.84

15. 150% Completion Rate: 87

16. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

17. Graduates Available for Employment: 33

18. Graduates Employed in the Field: 33

19. Placement Rate: 100

Graduates employed in the field:

20a. 20 to 29 hours per week: 0

20b. at least 30 hours per week: 33

Indicate the number of graduates employed:

21a. In a single position in the field of study: 33

21b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

21c. Freelance/self-employed: 0

21d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

22. Does this educational program lead to an occupation that requires State licensing? No

39. Graduates Available for Employment: 33

40. Graduates Employed in the Field: 33

41. Graduates Employed in the Field Reported receiving the following Salary or Wage: For graduates employed in the field, indicate their salaries/earnings below. If there are none in any specific range, indicate "0." :

1. Report Year: 2017

2. Institution Code: 1915141

3. Institution Name: NTMA Training Centers of Southern California

4. Name of Program: Advanced Machinist Training

5. Degree/Program Level: Diploma/Certificate

6. Degree/Program Title: Diploma/Certificate

7. Number of Degrees, Diplomas or Certificates Awarded: 9

8. Total Charges for this Program: $15,000.00

9. The percentage of enrolled students in 2017 receiving federal student loans to pay for this program: N/A

10. The percentage of graduates in 2017 who took out federal student loans to pay for this program: N/A

11. Number of Students Who Began the Program: 11

12. Number of Students Available for Graduation: 11

13. Number of On-time Graduates: 9

14. Completion Rate: 81.82

15. 150% Completion Rate: 82

16. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

17. Graduates Available for Employment: 8

18. Graduates Employed in the Field: 5

19. Placement Rate: 62.5

Graduates employed in the field:

20a. 20 to 29 hours per week: 0

20b. at least 30 hours per week: 5

Indicate the number of graduates employed:

21a. In a single position in the field of study: 5

21b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

21c. Freelance/self-employed: 0

21d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

22. Does this educational program lead to an occupation that requires State licensing? No

39. Graduates Available for Employment: 8

40. Graduates Employed in the Field: 5

41. Graduates Employed in the Field Reported receiving the following Salary or Wage: For graduates employed in the field, indicate their salaries/earnings below. If there are none in any specific range, indicate "0." :

1. Report Year: 2017

2. Institution Code: 1915141

3. School Code: N/A

4. Institution Name: NTMA Training Centers of Southern California

5. Total number of students at this branch location: 225

6. Name of Programs offered at this branch location: Machinist Training, CNC Machining, Inspection, Mastercam Programming, Advanced Mastercam Programming, Advanced CNC Machining, Advanced Machinist Training

7. Street Address (Physical Location): 12131 Telegraph Road

8. City: Santa Fe Springs

9. State: CA

10. Zip Code: 90670

1. Report Year: 2017

2. Institution Code: 1915141

3. School Code: N/A

4. Institution Name: NTMA Training Centers of Southern California

5. Total number of students at this branch location: 165

6. Name of Programs offered at this branch location: Machinist Training, CNC Machining, Inspection, Mastercam Programming

7. Street Address (Physical Location): 1717 S. Grove Ave.

8. City: Ontario

9. State: CA

10. Zip Code: 91761

No Satellite Data was inputted by this Institution.