NTMA Training Centers of Southern California - 2019 Annual Report Summary

1. Report Year: 2019

2. Institution Code: 1915141

3. Institution Name: NTMA Training Centers of Southern California

4. Street Address (Physical Location): 12131 Telegraph Road

5. City: Santa Fe Springs

6. State: CA

7. Zip Code: 90670

8. Form of business organization of this institution: Non-profit corporation

9. Number of Branch Locations: 1

10. Number of Satellite Locations: 1

11a. Is this institution current with all assessments to the Student Tuition Recovery Fund? Yes

11b. Is this institution current on Annual Fees?: Yes

12. Is your institution accredited by an accrediting agency/agencies recognized by the United States Department of Education? Yes

12a. Accrediting Agency (more than one agency may be selected): Accrediting Commission of Career Schools and Colleges

13. If your institution has specialized accreditation from a recognized United States Department of Education approved specialized/programmatic accreditor? N/A

14. Has any accreditation agency taken any final disciplinary action against this institution No

15. Does your institution participate in federal financial aid programs under Title IV of the Federal Higher Education Act? Yes

15a. What is the total amount of Title IV funds received by your institution in this Reporting Year? $1,676,489.94

16. Does your institution participate in veterans' financial aid education programs? N/A

16a. What is the total amount of veterans' financial aid funds received by your institution in this Reporting Year? $286,011.88

17. Does your institution participate in the Cal Grant program? No

18. Is your institution on California`s Eligible Training Provider List (ETPL)? Yes

19. Is your institution receiving funds from the Work Innovation and Opportunity Act (WIOA) Program? Yes

20. Does your Institution participate in, or offer, any other state or federal government financial aid programs? (i.e., vocational rehab…) Yes

20a. You indicated "Yes" for #20, please provide the name of the financial aid program below: Department of Rehabilitation

21. Provide the percentage of institutional income during this Reporting Year that was derived from public funding: 88

22. Does your Institution participate in, or offer any non-government financial aid programs? (i.e., private grants/loans, institutional grants/loans): Yes

22a. You indicated "Yes" for #22, please provide the name of the financial aid programs below.: Institutional Scholarship

23. The percentage of institutional income in the reporting year that was derived from any non-government financial aid: 12.87

24. Enter the most recent three-year cohort default rate reported by the U.S. Department of Education for this institution, if applicable: 9

25. Provide the percentage of the students who attended this institution during this Reporting Year who received federal student loans to help pay their cost of education at the school: 74

27. Total number of students currently enrolled at this institution. Indicate the number of students attending and/or enrolled in all programs at your institution (minus the number of students who cancelled during the cancellation period) January 1st through December 31st: 521

28. Number of Doctorate Degree Programs Offered? Indicate the number of Doctorate degree Programs the institution offered for the reporting year. (Number of Programs not Students): 0

29. Number of Students enrolled in Doctorate programs at this institution? Indicate the number of students enrolled and/or active in all Doctorate programs at your institution as of January 1st through December 31st, minus the number of students who cancelled during the cancellation period: 0

30. Number of Master Degree Programs Offered? Indicate the number of Master degree Programs the institution offered for the reporting year. (Number of Programs not Students): 0

31. Number of Students enrolled in Master programs at this institution? Indicate the number of students enrolled and/or active in all Master programs at your institution as of January 1st through December 31st, minus the number of students who cancelled during the cancellation period: 0

32. Number of Bachelor Degree Programs Offered? Indicate the number of Bachelor degree Programs the institution offered for the reporting year. (Number of Programs not Students): 0

33. Number of Students enrolled in Bachelor programs at this institution? Indicate the number of students enrolled and/or active in all Bachelor programs at your institution as of January 1st through December 31st, minus the number of students who cancelled during the cancellation period: 0

34. Number of Associate Degree Programs Offered? Indicate the number of Associate degree Programs offered for the reporting year. (Number of Programs not Students) : 0

35. Number of Students enrolled in Associate programs at this institution? Indicate the number of students enrolled and/or active in all Associate programs at your institution as of January 1st through December 31st, minus the number of students who cancelled during the cancellation period: 0

36. Number of Diploma or Certificate Programs Offered? Indicate the number of Diploma or Certificate Programs offered for the reporting year. (Number of Programs not Students): 7

37. Number of Students enrolled in diploma or certificate programs at this institution? Indicate the number of students enrolled and/or active in all diploma/certificate programs at your institution as of January 1st through December 31st, minus the number of students who cancelled during the cancellation period: 521

Institution's Website: www.trainingcenters.org

School Performance Fact Sheet

Catalog

1. Report Year: 2019

2. Institution Code: 1915141

3. Institution Name: NTMA Training Centers of Southern California

4. Name of Program: Conventional & CNC Machining

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: 48.0510 - Computer Numerically Controlled (CNC) Machinist Technology/CNC Machinist, 48.0503 - Machine Shop Technology/Assistant, 48.0501 - Machine Tool Technology/Machinist

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4041 - Machinists, 51-9161 - Computer Numerically Controlled Tool Operators

8. Number of Degrees, Diplomas or Certificates Awarded: 0

9. Total Charges for this Program: $6,475.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 0

13. Number of Students Available for Graduation: 0

14. Number of On-time Graduates: 0

15. Completion Rate: N/A

16. 150% Graduates?: 0

17. 150% Completion Rate: 0

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 0

20. Graduates Employed in the Field: 0

21. Placement Rate: N/A

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 0

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 0

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 0

44. Graduates Employed in the Field: 0

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

1. Report Year: 2019

2. Institution Code: 1915141

3. Institution Name: NTMA Training Centers of Southern California

4. Name of Program: Inspection

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: 48.0510 - Computer Numerically Controlled (CNC) Machinist Technology/CNC Machinist, 48.0501 - Machine Tool Technology/Machinist, 48.0599 - Precision Metal Working, Other, 48.0000 - Precision Production Trades

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4041 - Machinists, 51-4081 - Multiple Machine Tool Setters, Operators, and Tenders

8. Number of Degrees, Diplomas or Certificates Awarded: 68

9. Total Charges for this Program: $3,975.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 74

13. Number of Students Available for Graduation: 74

14. Number of On-time Graduates: 68

15. Completion Rate: 91.89

16. 150% Graduates?: 0

17. 150% Completion Rate: 0

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 68

20. Graduates Employed in the Field: 65

21. Placement Rate: 95.59

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 65

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 65

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 68

44. Graduates Employed in the Field: 65

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

1. Report Year: 2019

2. Institution Code: 1915141

3. Institution Name: NTMA Training Centers of Southern California

4. Name of Program: Mastercam

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: 48.0510 - Computer Numerically Controlled (CNC) Machinist Technology/CNC Machinist, 48.0501 - Machine Tool Technology/Machinist, 15.1306 - Mechanical Drafting and Mechanical Drafting CAD/CADD, 48.0000 - Precision Production Trades, General

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4041 - Machinists, 51-4111 - Tool and Die Makers, 51-9162 - Computer Numerically Controlled Tool Programmers

8. Number of Degrees, Diplomas or Certificates Awarded: 97

9. Total Charges for this Program: $3,975.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 116

13. Number of Students Available for Graduation: 116

14. Number of On-time Graduates: 97

15. Completion Rate: 83.62

16. 150% Graduates?: 0

17. 150% Completion Rate: 0

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 97

20. Graduates Employed in the Field: 94

21. Placement Rate: 96.91

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 94

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 94

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 97

44. Graduates Employed in the Field: 94

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

1. Report Year: 2019

2. Institution Code: 1915141

3. Institution Name: NTMA Training Centers of Southern California

4. Name of Program: CNC Machining

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: 48.0510 - Computer Numerically Controlled (CNC) Machinist Technology/CNC Machinist, 48.0501 - Machine Tool Technology/Machinist

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4041 - Machinists, 51-4081 - Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic

8. Number of Degrees, Diplomas or Certificates Awarded: 107

9. Total Charges for this Program: $3,975.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 123

13. Number of Students Available for Graduation: 123

14. Number of On-time Graduates: 107

15. Completion Rate: 86.99

16. 150% Graduates?: 0

17. 150% Completion Rate: 0

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 107

20. Graduates Employed in the Field: 106

21. Placement Rate: 99.07

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 106

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 106

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 107

44. Graduates Employed in the Field: 106

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

1. Report Year: 2019

2. Institution Code: 1915141

3. Institution Name: NTMA Training Centers of Southern California

4. Name of Program: Advanced Mastercam

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: 15.1302 - CAD/CADD Drafting and/or Design Technology/Technician, 48.0510 - Computer Numerically Controlled (CNC) Machinist Technology/CNC Machinist, 48.0501 - Machine Tool Technology/Machinist, 48.0507 - Tool and Die Technology/Technician

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4041 - Machinists, 51-4111 - Tool and Die Makers, 51-9162 - Computer Numerically Controlled Tool Programmers

8. Number of Degrees, Diplomas or Certificates Awarded: 29

9. Total Charges for this Program: $3,975.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 0

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 0

12. Number of Students Who Began the Program: 39

13. Number of Students Available for Graduation: 39

14. Number of On-time Graduates: 29

15. Completion Rate: 74.36

16. 150% Graduates?: 0

17. 150% Completion Rate: 0

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 29

20. Graduates Employed in the Field: 29

21. Placement Rate: 100

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 29

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 29

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 0

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 29

44. Graduates Employed in the Field: 29

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

1. Report Year: 2019

2. Institution Code: 1915141

3. Institution Name: NTMA Training Centers of Southern California

4. Name of Program: Machinist Training Program - 7 Month Program

5. Program Level: Diploma/Certificate

6. Select the Classification of Instructional Programs (CIP) Code that applies to this educational program: 48.0510 - Computer Numerically Controlled (CNC) Machinist Technology/CNC Machinist, 48.0501 - Machine Tool Technology/Machinist, 48.0507 - Tool and Die Technology/Technician

7. Select all Standard Occupational Classification (SOC) Codes that apply to this program: 51-4033 - Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

8. Number of Degrees, Diplomas or Certificates Awarded: 189

9. Total Charges for this Program: $14,990.00

10. The percentage of enrolled students in the reporting year receiving federal student loans to pay for this program: 74

11. The percentage of graduates in the reporting year who took out federal student loans to pay for this program: 78

12. Number of Students Who Began the Program: 215

13. Number of Students Available for Graduation: 213

14. Number of On-time Graduates: 167

15. Completion Rate: 78.4

16. 150% Graduates?: 189

17. 150% Completion Rate: 89

18. Is the above data taken from the Integrated Postsecondary Education Data System (IPEDS) of the United States Department of Education?: No

19. Graduates Available for Employment: 183

20. Graduates Employed in the Field: 149

21. Placement Rate: 81.42

22. Graduates employed in the field

22a. 20 to 29 hours per week: 0

22b. at least 30 hours per week: 149

23. Indicate the number of graduates employed

23a. In a single position in the field of study: 149

23b. In concurrent aggregated positions in the field of study (2 or more positions at the same time): 0

23c. Freelance/self-employed: 1

23d. By the institution or an employer owned by the institution, or an employer who shares ownership with the institution: 0

24. Does this "Program" lead to a certificate or degree related to one or more of the following allied health professionals that requires clinical training?: No

26. Does this educational program lead to an occupation that requires State licensing? No

43. Graduates Available for Employment: 183

44. Graduates Employed in the Field: 149

45. Graduates Employed in the Field Reported receiving the following Salary or Wage:

1. Report Year: 2019

2. Institution Code: 1915141

3. School Code: 1915141

4. Institution Name: NTMA Training Centers of Southern California

5. Total number of students at this branch location: 521

6. Name of Programs offered at this branch location: Machinist Training, CNC Machining, Advanced CNC Machining, Mastercam Programming, Advanced Mastercam Programming, Inspection, Conventional & CNC Machining

7. Street Address (Physical Location): 12131 Telegraph Road

8. City: Santa Fe Springs

9. State: CA

10. Zip Code: 90670

No Satellite Data was inputted by this Institution.